CDL Chlorine Dioxide 0,3% Solution 1000ml – CDs – Chlorine Dioxide Solution

Description

CHLORINE DIOXIDE 0,3% SOLUTION – 1000ml – Use biocidal products carefully. Always read the label and product information before use." CDS – Chlorine Dioxide Solution – CDL plus pipette – Brown glass bottle – Made in Germany
CDL Chlorine Dioxide Warning Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of the reach of children. Wash hands thoroughly after handling. Wear protective gloves and eye/face protection.
CDL IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.
CHLORINE DIOXIDE SOLUTIONS are approved in Germany for drinking water disinfection, but not for medical use.
Solution for drinking water disinfection. Active ingredient: Chlorine dioxide 0,3% 100% PLASTIC-FREE Manufactured using a high-quality distillation process. Made in Germany in compliance with the highest hygiene and safety regulations.

Important information
warnings
Use biocidal products with care. Always read the label and product information before use. The product has a shelf life of at least 2 months when stored between 8°C and 4°C. Causes serious eye irritation. If medical advice is needed, have product container/label at hand. Keep out of the reach of children. Wear protective gloves/protective clothing/eye protection/face protection. If in eyes: Rinse cautiously with water for several minutes - removing contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Ingredients:
Chlorine dioxide < 0,3% (=3000ppm)

Liability
The product has a shelf life of at least 2 months when stored between 8°C and 4°C. Causes serious eye irritation. If medical advice is needed, have product container/label at hand. Keep out of the reach of children. Wear protective gloves/protective clothing/eye protection/face protection. If in eyes: Rinse cautiously with water for several minutes - removing contact lenses if possible. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Chlorine dioxide <0,3% (=3000ppm) Trade name: Chlorine dioxide 0,3%
Use biocidal products with care. Always read the label and product information before use

Disposal considerations 13.1. Waste treatment methods Disposal recommendations Do not allow to enter drains or waterways. Do not allow to enter the subsoil/soil. Dispose of in accordance with official regulations. Uncontaminated and completely emptied packaging can be recycled. Contaminated packaging should be treated in the same way as the substance. Disposal of uncleaned packaging and recommended cleaning agents

Application: Add 1 to 2 drops of the chlorine dioxide solution to one liter of drinking water and allow to act for about 1-2 minutes. Adjust the dosage and exposure time depending on the degree of contamination. Use disinfected drinking water within two days.

cdl 0 3 Application

CDL stands for chlorine dioxide solution. It is often used to disinfect drinking water because it is effective against many types of microorganisms, including bacteria, viruses and protozoa that can cause disease. It is also effective against biofilms that can form in water systems.

Here is a general guide on how to use CDL for drinking water disinfection. Please note that you should follow the specific manufacturer's instructions and recommendations indicated on the product you are using. Additionally, drinking water should always be tested and treated by a qualified professional to ensure safety.

1. Test the water to determine the level of contamination. You will need this information to determine the correct amount of CDL.
2. Prepare the CDL solution according to the manufacturer's instructions. Usually, the CDL is a concentrate that needs to be diluted with water.
3. Add the prepared CDL solution to the water to be treated. The exact amount depends on the concentration of CDL and the level of water contamination.
4. Stir the water to ensure the CDL is evenly distributed.
5. Allow the water to stand for a certain amount of time (e.g. 30 minutes to several hours) to allow the CDL to take effect. The exact time depends on the concentration of the CDL and the level of water contamination.
6. Test the water again to make sure it is safe. If it is still contaminated, you may need to repeat the process.

Remember that using CDL to disinfect drinking water is just one of many possible treatments. It is important to identify and eliminate the source of contamination and ensure that the water remains clean and safe.